Long life of Mineral separator should be maintained routinely

Each machine has its own service life, but we sometimes find that it is actually not so long, is the manufacturer lying? No, the machine is like the human body, people will be sick, need to recuperate, the machine is the same, the machine will be damaged, it needs maintenance. The machine will be damaged, it needs maintenance. Here, the color sorter engineer here to the majority of the name of the photoelectric users to provide optical sorting machine daily maintenance methods, do the following items, your ore sorting machine can maintain a longer life use.

　1, ash scraper dust removed

　Once a week with ash cleaning air gun to clean the dust on the ash scraper leather (hair) brush; once a month to check whether the leather (hair) brush is running smoothly, if there is loose, tighten the loose position. Use a period of time if the skin (hair) brush of the soft skin (hair) tilted to one side, you can take off the skin (hair) brush up and down to adjust it can continue to use.

　2、Sorting room dust removed

　Color sorting machine sorting indoor and outdoor glass such as dust (generally the sorting room before the glass), wipe with a clean soft cloth dipped in alcohol, while checking whether the ash scraper is running normally. When the glass surface is completely dry and clean, then color sorting.

3、Filter drainage

All pneumatic supply part of the machine filter device, must do diligent drainage (at least 2 times per shift) to prevent all kinds of impurities into the core components of the machine damage the machine, so as not to cause unnecessary losses.

4、Maintenance operation before each use.

Check the color sorter, air compressor, air storage tank, filter and other parts are intact, there is no loose, cleaning the dust and drainage of various parts.

　5、Check in operation

Check the signal indication (including work indication, alarm indication) and spray valve action during the operation of the color sorter.

　6、Maintenance operation after work stop

　Please use the air gun to clean up the vibrator (especially the material condensed in the vibrator bucket), the inside of the body, the receiving hopper, and the dust scraping brush.

　Note: When cleaning the receiving hopper with the air gun, it is strictly forbidden to blow the air gun directly into the nozzle opening. Otherwise it will cause damage to the spray valve!

Monthly: Check the filter element; check the cleanliness of the dust scraping brush.

　　Precautions for areas with high humidity

(1) The humidity in the southern region is high, it is recommended that customers install two moisture filters.

(2) the user depending on the site, at least once every two hours to drain, otherwise moisture into the machine will shorten the life of the machine.

(3) each filter in the gas circuit (including the internal machine), timely check the drainage situation, and replace the filter element from time to time.

(4) careful maintenance to ensure the normal operation of the machine, but also can effectively extend the life of the machine.

          Warning: When cleaning or changing the various parts of the machine, please first turn off the power through the on/off button, and then place the air switch on the side of the main unit in the OFF position before cleaning or changing.

         Note: Please do not touch the CCD camera lens of the intelligent color CCD color sorter, if the setting and adjustment is not correct, it will affect the color selection effect.